Table of Contents
Advertisement
7.6.4.4 Setting LDAP Replicators
In a KWS600v3 Multi-cell solution the Secondary KWS600v3 needs access to the
information (such as system ARI code and user data) that is stored on the Master
KWS600v3/LDAP Server. Therefore, it is necessary to activate the LDAP replicator
services for the Secondary KWS600v3.
Under the Configuration menu, click LDAP, and then click Replicator.
1
Figure 54 Adm. Page: Configuration/LDAP/Replicator page
Select the Enable check box.
2
In the Server field, type the IP address of the Master KWS600v3 - or the LDAP Server,
3
if this is part of your installation.
In the User field, type the user name.
4
In the Password field, type the password.
5
Note: The password will be verified against the Master KWS600v3.
Click OK.
6
Click Reset (under Administration menu) to save your configuration.
7
Configuring KIRK Wireless Server 600v3
(Secondary)
KIRK Wireless Server 600v3 Installation and Configuration Guide
113
Advertisement
Table of Contents
