Kirk Maintenance Software - Polycom KIRK 14117800 Installation And Configuration Manual

30 Introduction
2.2.3.2 Electrical Requirements
The following electrical requirement must be met:
• The supplied power for the charger must be 110 V to 120 V ac nominal (or 220 V to
230 V ac nominal), 50/60 Hz.

2.2.4 KIRK Maintenance Software

This section describes the computer requirements to run the installation and maintenance
tools of the KWS600v3.
2.2.4.1 Software Requirements
• OS: Windows 2000 (SP4), Windows XP (SP2), Windows Vista (for the web based
Administration Page of the KWS600v3, OS can also be: Linux, Macintosh)
• CPU: Minimum 400MHz (2000/XP), 1GHz (Vista)
• RAM: Minimum 256 MB (2000/XP), 1 GB (Vista)
• GPU/Display: XGA (1024x768)
• Harddisk: Minimum recommended harddisk size by OS and other installed
applications + 25 MB free space for the application.
Note: Depending on other applications running on the system, CPU, RAM and harddisk
may vary.
14117800, Ed.2.6