Table of Contents
Advertisement
Under the Configuration menu, click DECT, and then click Radio.
1
Figure 35 Adm. Page: Configuration/DECT/Radio page
Select the Disable check box to disable the radio.
2
Click OK.
3
Click Reset (under Administration menu) to save your configuration.
4
7.6.1.9 Configuring TOS (Type of Service) Priorities
It is possible to change the TOS (Type of Service) priorities in a system. The TOS priority
depends on the network used.
Under the Configuration menu, click IP.
1
Figure 36 Adm. Page: Configuration/IP/Settings page
In the TOS priority - RTP Data field, type a TOS priority.
2
Depending on the network, it may be necessary to change the TOS priority.
• Most networks: The default TOS priority is: 0x10
Configuring KIRK Wireless Server 600v3
KIRK Wireless Server 600v3 Installation and Configuration Guide
(Primary)
99
Advertisement
Table of Contents
