Table of Contents
Advertisement
determines whether the DECT radio code PCS04fd was already installed. If this is not the
case, the current DECT radio code is downloaded from the address 192.168.0.10/firm/
ccfp1200.bin, the UPDATE/BMC internal variable is overwritten with PCS04fd and,
finally, the device is reset as soon at it is not being actively used.
13.5.6 SCFG Command
mod cmd UP0 scfg <url> [<final-command> <save-serial> [ /force <hours> ]]
This will cause the device to upload its current configuration to <url>. This will be done
using an HTTP PUT command. <url> must be writable thus. Within <url>, some meta
character strings are replaced as follows:
Sequence
#F
#B
#H
#h
#m
#d
#bn
#i
The rolling backup index loops over 0 .. n-1 for each backup.
Beginning with V7.00 the optional Parameters <final-command>, <save-serial> and /
force <hours> will be recognized.
<final-command> defines the command to be executed after successful completion of
scfg (typically no-op is used).
<save-serial> is compared to the UPDATE/SCFG variable. If it is not equal, the
command is started. If it is equal and /force is not specified the command is skipped,
otherwise /force is evaluated.
/force <hours> specifies the number of hours after which scfg is executed again even if
<save-serial> has not changed.
mod cmd UP0 scfg http://192.168.0.10/configs/saved/#h#b5.txt no-op WEEKLY /force 168
will save the device configuration once per week with a backlog of 5 weeks.
Replaces
kernel build number
boot code build number
hardware build
Device hardware number
MAC address of the device
Current date and time
rolling backup index
(one of) the local ip-address(es) 192.168.0.1
KIRK Wireless Server 600v3 Installation and Configuration Guide
Configuration of the Update Server
Example
08-12345
401
102
P1200-03-0d-f0
00-90-33-03-0d-f0
20051010-170130
3
195
Advertisement
Table of Contents
