Configuring The Secondary Kirk Wireless Server 600V3; Figure 48 Adm. Page: Configuration/Dect/Radio Page - Polycom KIRK 14117800 Installation And Configuration Manual

Configuring KIRK Wireless Server 600v3
108
From the Mode list, select Standby. Selecting Standby defines the KWS600v3 as an
2
alternative Master (Standby).
Check that the settings for Protocol, GK (Gate Keeper - Primary call handler), Alt-GK
3
(Alternative Gate Keeper - Secondary call handler) are identical to the settings for the
Master (Primary) KWS600v3.
Click OK.
4
Click Reset (under Administration menu) to save your configuration.
5
7.6.3.5 Configuring DECT Radio
Under the Configuration menu, click DECT, and then click Radio.
1

Figure 48 Adm. Page: Configuration/DECT/Radio page

Select the Disable check box to disable the radio.
2
Click OK.
3
Click Reset (under Administration menu) to save your configuration.
4
The alternative (Standby) Master KWS600v3 is now configured.

7.6.4 Configuring the Secondary KIRK Wireless Server 600v3

This section describes how to configure KWS600v3 secondaries in a multi-cell solution.
After configuring the Master (Primary) KWS600v3, you need to configure each
Secondary KWS600v3 to be used in the system one by one.
14117800, Ed.2.6
(Standby)