Table of Contents
Advertisement
Table 2 LED Indicator Description - Front Cover
Fast green flashing
(light appears orange because of
the steady red)
Slow green flashing
(light appears orange because of
the steady red)
Slow red flashing
Fast red flashing
4.2.4.2 Faceplate
LED Indicator Description - Faceplate
LED Indicator
LINK Indicator - yellow
100 Indicator - green
Alarm Indicator - red
Ready Indicator - green
Power Indicator - yellow
4.2.5 KIRK Wireless Server 600v3 - Reset Button
It is possible to restart or reset the KWS600v3 by pressing the Reset button on the
faceplate of the KWS600v3. For description of the faceplate, refer to
45.
4.2.5.1 Resetting the KIRK Wireless Server 600v3 Hardware
This section contains description of the different actions that take place when pressing
the Reset button.
Installing the KIRK Wireless Server 600v3
empty system
in operation with one or more active connections
in operation with the maximum active connections (busy)
Out of sync.
link layer software has established connection
line speed is 100Mbit/sec.
KWS600v3 software is in error mode
KWS600v3 software is up running in normal mode
KWS600v3 is connected to Power
KIRK Wireless Server 600v3 Installation and Configuration Guide
Meaning
"Faceplate" on page
45
Advertisement
Table of Contents
