Table of Contents
Advertisement
System Management
166
Under the Configuration menu, click General, and then click admin.
1
Figure 96 Adm. Page: Configuration/General/Admin/Change Password page
In the User name field, type a user name.
2
In the Password field, type a new password, then type the password again in the field
3
below to confirm it.
Click OK to change the password.
4
10.1.2 Reading System Information
This page provides general system information.
Under the Configuration menu, click General.
1
Figure 97 Adm. Page: Configuration/General/Info page
On the General/Info page you can read information about:
•
the used firmware, boot code and hardware
•
Serial number; Mac Address of the system
•
Coder
•
SNTP Server; from which IP address the system receives its time information
14117800, Ed.2.6
Advertisement
Table of Contents
