Table of Contents
Advertisement
10.1.10.3 Resetting in TFTP Mode
You can also reset the KWS600v3 in TFTP mode (Trivial File Transfer Protocol). The TFTP
mode is used, if the KWS600v3 is to be updated through the GWLOAD program. For
more information about using the GWLOAD program, refer to
Program" on page
Under the Administration menu, click Reset, and then click TFTP.
1
Figure 119 Adm. Page: Administration/Reset/TFTP page
Click OK.
2
10.2 Using the ServiceTool
The ServiceTool is used for repeater programming and handset adjustment.
Note: ServiceTool is not used for adjustment of the 5020 Handset.
This section provides information about:
•
"" on page 183
•
"" on page 183
10.2.1 KIRK Repeater Programming
For information about repeater programming, refer to
with the ServiceTool" on page
202.
56.
KIRK Wireless Server 600v3 Installation and Configuration Guide
System Management
"Using the GWLOAD
"Programming the KIRK Repeater
183
Advertisement
Table of Contents
