Table of Contents
Advertisement
7.6.1.4 Configuring Ethernet Link
Under the Configuration menu, click ETH0, and then click Link.
1
Figure 31 Adm. Page: Configuration/ETH0/Link page
From the Link list, select auto, and then click OK.
2
When selecting auto, the link speed will be determined by the network switch.
Click Reset (under Administration menu) to save your configuration.
3
7.6.1.5 Setting LDAP Mode
For the Master (Primary) KWS600v3 to act as an LDAP Server for all the KWS600v3
secondaries, you need to set the LDAP (Lightweight Directory Access Protocol) mode.
Note: It is recommended that the Primary KWS600v3 acts as an LDAP Server in small to
medium-sized installations.
Under the Configuration menu, click LDAP, and then click Server.
1
Figure 32 Adm. Page: Configuration/LDAP/Server page
In the User fields, type the user names.
2
Configuring KIRK Wireless Server 600v3
(Primary)
(Primary/LDAP Server)
KIRK Wireless Server 600v3 Installation and Configuration Guide
95
Advertisement
Table of Contents
