Configuring KIRK Wireless Server 600v3
104
Click Reset (under Administration menu) to save your configuration.
5
The Sync Master is now configured.
7.6.3 Configuring the Alternative Master KIRK Wireless Server 600v3
This section describes how to configure an alternative (Standby) Master KWS600v3 in a
multi-cell solution. In case the Master KWS600v3 stops working, the alternative
(Standby) Master KWS600v3 will take over connection to the call handler.
Note: Configuring an alternative Master KWS600v3 is optional - and only recommended
- if you have a very large multi-cell installation (number of KWS600v3 and/or handsets).
Note: The alternative Master KWS600v3 can also be used as the alternative LDAP Server.
If a dedicated wireless server is used as a Master KWS600v3 only, the alternative Master
KWS600v3 must also be dedicated. For more information about the alternative LDAP
Server, refer to
Figure 42 KWS600v3 Multi-cell installation with Alternative (Standby) Master
For information on accessing the web based Administration Page, refer to
Web Based Administration Page" on page
This section contains information about:
•
"Entering a System User Name and Password (Standby)" on page 105
•
"Assigning a Specific IP Address (Standby)" on page 105
•
"Configuring Ethernet Link (Standby)" on page 107
•
"Configuring DECT Master (Standby)" on page 107
•
"Configuring DECT Radio (Standby)" on page 108
14117800, Ed.2.6
"" on page
120.
79.
"Accessing the