Table of Contents
Advertisement
Table 5-2
Base Station
252
253
254
255
Note
Repeater and base station numbers must not be the same. Neither can the
repeater have a number similar to another base station or another repeater
in a situation where common overlap is present between the actual units
(Numbers with red colour show where numbering could be identical
between different units). If this occurs, handover between the different
units is not possible.
Table 5-3
Numbering of base stations and repeaters in a normal configuration
First repeater
Second repeater
Third repeater
Table 5-4
Numbering of repeaters in a repeater jump configuration
First repeater in chain
Second repeater in chain
Third repeater in chain
For more information about programming the repeater with the ServiceTool, refer to the
Help File in the ServiceTool. The ServiceTool is to be downloaded from
www.polycom.com.
Repeater Numbering in a Multi Cell Solution
Repeater 1
Repeater 2
60
124
61
125
62
126
63
127
Example of a Normal Base Station/Repeater Configuration
No. of base station + 64
Base to synchronize on: Number of base station
No. of base station + 128
Base to synchronize on: Number of base station
No. of base station + 192
Base to synchronize on: Number of base station
Example of Repeater Jump Configuration
No. of base station + 64
Base to synchronize on: Number of base station
No. of base station + 128
Base to synchronize on: Number of previous repeater
No. of base station + 192
Base to synchronize on: Number of previous repeater
KIRK Wireless Server 600v3 Installation and Configuration Guide
Installing the KIRK Repeater
Repeater 3
188
189
190
191
63
Advertisement
Table of Contents
