Installing Battery On Kirk 5020 / 5040 Handsets; Figure 2 Remove Back Cover From Handset With Screw Fastener; Figure 3 Remove Back Cover From Handset - Polycom KIRK 14117800 Installation And Configuration Manual

Figure 2 Remove Back Cover from Handset with Screw Fastener

Place the battery plug in the slot in the battery box.
3
Insert battery with the label readable.
4
Replace the back cover.
5

6.4.1 Installing Battery on KIRK 5020 / 5040 Handsets

To install the battery press down the back cover and slide it towards the bottom of the
1
handset.

Figure 3 Remove Back Cover from Handset

Lift off back cover.
2
Insert battery with the label readable.
3
Replace the back cover by pressing the back cover back in the locked position (when
4
you hear a click the back cover is in position).
KIRK Wireless Server 600v3 Installation and Configuration Guide
Preparing KIRK Handset for Use 69