Update Firmware; Updating Base Station Firmware - Polycom KIRK Wireless Server 8000 Interface Configuration Manual

Update Firmware

Update Firmware

Updating Base Station Firmware

Polycom, Inc.
• Press the Mute button to select Send MSF.
KIRK® 50-, 60-, and 70-Handset Series
To access the corporate phonebook via a handset from the Polycom® KIRK®
50-, 60-, and 70- Handset Series, please enable the long key MSF Function:
• Press the Menu button
• Select Settings
• Select Advanced
• Select Long Key
• Select MSF
Once the long key press function is active, you can use the corporate
phonebook in one of the following ways:
KIRK® 40-, 50-, 60-, 70-Handset Series
• Press long 0 and toggle between the search attributes that have been added
in the corporate phonebook settings.
• Search by using the keypad buttons from 0 to 9 to enter text. Press each key
once for every character.
• Press # to delete a character.
• Use the left and right soft keys to navigate and press the Mute button to
select your choic.e
• Press long 1 to 5 keys to skip the initial menu and go directly to search.
• Press the hook key to dial a number.
When a new release or updates to the firmware are available, go to the Update
Firmware page to download the new firmware.
In this section you can find detailed information about:
• 'Updating Base Station
• 'Updating Server
When a new release or updates of the base station firmware are available, you
can download the new firmware. You may choose between two procedures:
flash update by means of embedded SW and uploading an external file.
Firmware'
Firmware'
General System Settings
32