Set Up Of The Hardware For Kirk Handset Adjustment; Adjusting The Kirk Handset With The Servicetool; Figure 95 Programming Kit Handset - Polycom KIRK 14117800 Installation And Configuration Manual

KIRK Handset Management
164

Figure 95 Programming Kit Handset

Splitter
Serial cable
Note: For handset adjustment of 40XX Handset you use the charger accompanying the
handset.
Note: For handset adjustment you also need the programming software (ServiceTool).
The ServiceTool is not part of the Programming Kit Handset but can be downloaded
from www.polycom.com.

9.6.2 Set up of the Hardware for KIRK Handset Adjustment

Connect the serial cable to the programming stand/charger and Com port of your
1
computer.
Place the handset in the charger.
2
The handset is now ready for programming via the ServiceTool

9.6.3 Adjusting the KIRK Handset with the ServiceTool

The ServiceTool is the tool you access from your desktop and use for repeater
programming, handset adjustment and software download to the handset and repeater.
For more information about adjusting the handset with the ServiceTool, refer to the Help
File in the ServiceTool. The ServiceTool is to be downloaded from www.polycom.com.
14117800, Ed.2.6