Polycom RSS 2000 Getting Started Manual
  1. Manuals
  2. Brands
  3. Polycom Manuals
  4. Server
  5. RSS 2000
  6. Getting started manual
Polycom RSS 2000 Getting Started Manual

Polycom RSS 2000 Getting Started Manual

Hide thumbs Also See for RSS 2000:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual, Getting Started Manual
Polycom ™ RSS 2000 V2.0.0.000

Getting Started guide

General Safety Precautions

Follow these rules to ensure general safety:
• Keep the area around the Polycom RSS 2000 unit clean, free of clutter
and well ventilated.
• Decide on a suitable location for the equipment rack that will hold
the RSS 2000 unit and is near a grounded power outlet.
• • Use a regulating uninterruptible power supply (UPS) to protect the
RSS 2000 unit from power surges and voltage spikes, and to keep it
operating in case of a power failure.
Hardware Specification
Pentium 4, 2.8Mhz,1.5G RAM,250G Hardisk.
• Form Factor: 1U 19" rack mount
• Height: 1.73" (44 mm)
• Width: 16.83" (430 mm)
• Depth: 15.35" (390 mm)
• Gross Weight: 22.4 lbs (10.2 kg)
• Power Supply: Thermal controlled 220W
ATX AC power supply w/PFC
• AC Voltage: 100 - 240 VAC, 60-50 Hz, 5-3
Amps
XP OS
Preparations
Obtain the following information from your network administrator:
• RSS 2000 unit, Subnet Mask and Default Gateway IP addresses
• Gatekeeper IP address, Prefix, and E.164 of the RSS 2000.
DOC2153D
RSS 2000 V2.0 Getting Started guide - Release Note
Page 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RSS 2000 and is the answer not in the manual?

Questions and answers

Related Manuals for Polycom RSS 2000

Summary of Contents for Polycom RSS 2000

  • Page 1: Getting Started Guide

    General Safety Precautions Follow these rules to ensure general safety: • Keep the area around the Polycom RSS 2000 unit clean, free of clutter and well ventilated. • Decide on a suitable location for the equipment rack that will hold the RSS 2000 unit and is near a grounded power outlet.

  • Page 2: Unpacking And Installing The Rss 2000

    Unpacking and Installing the RSS 2000 1 Place the RSS 2000 unit on a stable flat surface in the selected location. 2 To connect to the power source, insert the power cable into the Power connector on the rear panel of the RSS 2000 unit and insert the Power cable into the power source socket.

  • Page 3: Initial Rss 2000 Ip Configuration

    2. Via a RS232 or Telnet Console. 1. Changing the initial IP address via a cross over LAN cable 1. Connect a cross over LAN cable to LAN1 in the RSS 2000. 2. Set your laptop to the same segment of the RSS a.
  • Page 4 5. Go to system configuration->IP setting and modify the IP address , you can set a static IP or chose DHCP . Click the save button and than reset the system. DOC2153D RSS 2000 V2.0 Getting Started guide - Release Note Page 4...
  • Page 5 2.Changing the initial IP address via an RS232 Console or Telnet Another option to modify the IP address of the RSS 2000 is using the RS232 console. 1.Connect to the RS232 port – and activate the console (9600, 8bits) Login: Administrator (or any administrator password) When logged in to the console, you will see the current IP address of the system.
  • Page 6 Manager Trace 30011 Gatekeeper 1719 1720 Endpoint/ Q.931 Socket 1720 H.323 H.245 Socket 1730-1739 Audio / Video / Data 2000-2099 Live Broadcast 1800-1801 Media On Demand Archive 2800-2859 DOC2153D RSS 2000 V2.0 Getting Started guide - Release Note Page 6...
  • Page 7 Allow skip forward, backward for archives ! RTSP Support Download archives (multiple) via FTP FTP Support Password Lock for ordinary user Prevent ordinary user from changing his password DOC2153D RSS 2000 V2.0 Getting Started guide - Release Note Page 7...

  • Page 8: Rss2000 Policies And Limitations

    H263 – the playback will work well. Archive Converter When using the RSS2000ArchiveConverter – the transcoded file loaded back to the RSS will be limited to 20 FPS DOC2153D RSS 2000 V2.0 Getting Started guide - Release Note Page 8...
  • Page 9 Playback of H263 recording to the HDX may result with some video artifacts Stacking 1,Each RSS 2000 is capable of 2 recording and 8 H323 playbacks (total of 10 H323 Connections). When using the RSS Hunting option (When registering to the SE200/PathNavigator or Radvision GK) –...
  • Page 10 64Kbps (No support for G.728 at the RMX 2000 (RMX 2000 connect to the HDX and VSX at G.729A in 64K which is not supported by the RSS 2000)) – recording at this low video rate is not recommended in any case.

  • Page 11: Pending Issues

    Cisco GK is supported with the RSS 2000, however, RSS hunting option is not supported, each RSS must have a unique alias when registering to the Cisco GK. DOC2153D RSS 2000 V2.0 Getting Started guide - Release Note Page 11...

Table of Contents