Retrieving Serial Number On Kirk 5020 / 5040 Handsets; Figure 10 Remove Back Cover From Handset With Screw Fastener; Figure 11 Remove Back Cover From Handset - Polycom KIRK 14117800 Installation And Configuration Manual

Figure 10 Remove Back Cover from Handset with Screw Fastener

Lift the battery and read the serial number.
3
Replace battery and back cover.
4
Note: To show the serial number on the handset display, press *99984*, and then press
; the serial number appears on the handset display. Press < for 5 seconds to exit the
menu.

6.6.3 Retrieving Serial Number on KIRK 5020 / 5040 Handsets

Press down the back cover and slide it towards the bottom of the handset.
1

Figure 11 Remove Back Cover from Handset

Lift off back cover.
2
Lift the battery and read the serial number.
3
Replace battery and back cover.
4
Note: To show the serial number on the handset display (5020 / 5040 Handset), press
Menu, select Status and then select Firmware version. Press exit to exit the menu.
KIRK Wireless Server 600v3 Installation and Configuration Guide
Preparing KIRK Handset for Use 75