Chapter 5 Installing The Kirk Repeater; Kirk Repeater Description; Kirk Repeater Provides Rf Channels To Kirk Handsets - Polycom KIRK 14117800 Installation And Configuration Manual

Polycom wireless server installation and configuration guide
Table of Contents

Advertisement

Chapter 5 Installing the KIRK Repeater

This section provides information about the repeater and how to unpack and install it.
Installing repeaters requires a software installation as well as a hardware installation.
Before you install the equipment, ensure that a site planner defines the location of the
repeaters.
This section includes information about:

KIRK Repeater Description

Installing the KIRK Repeater
Recording the Installation Information
Checking Indicators
Powering the KIRK Repeater
Programming a KIRK Repeater with the KIRK Programming Kit
5.1 KIRK Repeater Description
This section contains information about:

KIRK Repeater provides RF Channels to KIRK Handsets

KIRK Repeater Types and Part Numbers
KIRK Repeater - Appearance and Components
KIRK Repeater LED Indicators
5.1.1 KIRK Repeater provides RF Channels to KIRK Handsets
The KIRK Repeater is a building block to be used to extend the coverage area in a KIRK
solution. The repeater does not increase the number of traffic channels, however it
provides a larger physical spreading of the traffic channels and thereby increases the
coverage area established with the KIRK Base Stations.The repeaters are mainly used in
areas with limited traffic. The KIRK Repeater is available with either 2 or 4 voice
channels. It is wireless and does not need physical connection to the KIRK Wireless
Server, making it very easy to install. The repeaters can be supplied with an external
antenna making it possible to create radio coverage in a remote area without cabling to
the rest of the installation.
Note
The RF communication is provided according to the band standard at the site:
• Repeater - DECT provides four RF channels of 1.88 GHz, DECT standard, used in
Europe, Australia and South America.
on page 49
on page 51
on page 54
on page 54
on page 51
The repeater is also termed by some manufacturers as the WRFP (Wireless
Radio Fixed Part).
KIRK Wireless Server 600v3 Installation and Configuration Guide
on page 54
on page 49
on page 50
on page 51
49
on page 54

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kirk 600v3Kws600v3

Table of Contents