Charging Kirk Handsets; Using The Charger; Figure 4 Single Charger For 3040 Handset; Figure 5 Single Charger For 4020 Handset And 4040 Handset - Polycom KIRK 14117800 Installation And Configuration Manual

Preparing KIRK Handset for Use
70

6.5 Charging KIRK Handsets

6.5.1 Using the Charger

Each handset is charged through the use of a handset charger, a compact desktop unit
designed to charge and automatically maintain the correct battery charge levels and
voltage.
The charger for 3040/4020/4040/4080 Handset is powered by an AC (115VAC or
230VAC) adapter that supplies the 9VDC at 230mA charger requirement.
The charger for 5020 / 5040 Handset is powered by an AC (110VAC to 240VAC) adapter
that supplies the 8VDC at 350mA charger requirement.
Note: Multicharger is only available in EMEA.

Figure 4 Single Charger for 3040 Handset

Figure 5 Single Charger for 4020 Handset and 4040 Handset

14117800, Ed.2.6