Configuring Mirroring Ports For The Local Mirroring Group; Configuring Mirroring Cpus For The Local Mirroring Group - HP 5820X Switch Configuration Manual

Configuring mirroring ports for the local mirroring group

You can configure a list of mirroring ports for a mirroring group at a time in system view, or only assign
the current port to it as a mirroring port in interface view. To assign multiple ports to the mirroring group
as mirroring ports in interface view, repeat the step.
Configuring mirroring ports in system view
To do...
1. Enter system view.
2. Configure mirroring ports.
Configuring a mirroring port in interface view
To do...
1. Enter system view.
2. Enter interface view.
3. Configure the current port as
a mirroring port.
NOTE:
A mirroring group can contain multiple mirroring ports.

Configuring mirroring CPUs for the local mirroring group

To do...
1. Enter system view.
2. Configure mirroring CPUs.
NOTE:
A mirroring group can contain multiple mirroring CPUs.
Use the command...
system-view
mirroring-group group-id
mirroring-port mirroring-port-list
{ both | inbound | outbound }
Use the command...
system-view
interface interface-type interface-
number
[ mirroring-group group-id ]
mirroring-port { both | inbound |
outbound }
Use the command...
system-view
mirroring-group group-id
mirroring-cpu slot slot-number-list
{ both | inbound | outbound }
169
Remarks
—
Required.
By default, no mirroring port is
configured for a mirroring group.
Remarks
—
—
Required.
By default, a port does not serve
as a mirroring port for any
mirroring group.
Remarks
—
Required.
By default, no mirroring CPU is
configured for a mirroring group.