Startup Process - HP A6604 Installation Manual

3) The configuration terminal displays information normally. You can see the startup window on
the local configuration terminal. For more information, refer to
4) After completing the power-on self-test (POST), the system prompts you to press Enter. When
the prompt appears, you can proceed to configure the router.

Startup Process

After power-on, the router initializes its memory, and then runs the extended BootWare. The
following information appears on the terminal screen:
System start booting...
Booting Normal Extend BootWare....
************************************************************
*
* HP SR66 BootWare, Version 1.24
*
************************************************************
Copyright (c) 2004-2008 Hangzhou HP Technologies Co., Ltd.
Compiled Date
CPU Type
CPU L1 Cache
CPU Clock Speed
Memory Type
Memory Size
Memory Speed
BootWare Size
Flash Size
cfa0 Size
NVRAM Size
BASIC CPLD Version
EXTEND CPLD Version : 133.0
PCB Version
BootWare Validating...
Press Ctrl+B to enter extended boot menu...
Press Ctrl + B at this prompt to enter the extended BootWare menu or let the system start to
decompress the application program.
: Dec 24 2008
: MPC8548E
: 32KB
: 1000MHz
: DDR2 SDRAM
: 1024MB
: 400MHz
: 1024KB
: 4MB
: 495MB
: 128KB
: 134.0
: Ver.B
"Startup Process" on page 5-5.
*
*
*