Panasonic KX-T336 System Reference Manual page 306

Operation
Before proceeding with the move, complete steps
1 to 3 at the source and destination extensions.
1. Lift the handset or press the SP-
PHONE button.
2. Dial the feature number for
"Walking Station Set."
• Confirmation tone 1 or 2 is
heard.
• If your PITS has a display, it
shows:
WST (E xxxx) ON
3. Replace the handset or press the
SP-PHONE button.
After the move, complete steps 4 to 6 at the
move destination extension.
4. Lift the handset.
5. First dial the feature number for
"Walking Station Cancel" and
then dial the original extension
number.
• Confirmation tone 1 or 2 is
heard.
• If your PITS has a display, it
shows:
WST (E xxxx) OFF
Extension number
3-F-4
(50195)
6. Replace the handset or press the
SP-PHONE button.
(Supplement)
When moving to an extension in the pre-installed
status, follow steps 1 to 3 for the extension
before moving it.
No settings are required for an extension in the
pre-installed status.