Panasonic KX-T336 System Reference Manual page 299

1.00 Music on Hold
Description
System built-in Music Source and/or External
Music Source (if available) provide(s) Music on
Hold and Background Music.
Music on Hold is a programmable feature that
provides music from a music source to a party
placed on Hold.
This lets the waiting party know that he is still
connected.
For further information about Background Music,
refer to the followings.
Section 4-I-4.00 "Background Music (BGM)"
Section 4-H-2.00 "Background Music (BGM)
Section 5-F-2.00 through External Pager"
Section 6-I-2.00
<Using system built-in Music Source>
1. Set Music Source Selector Switch on the T-
SW card to "INT MUS."
2. Assign "System-Operation (1/2)", External
Music Source 1,2 to "No, Yes."
3. Assign "Trunk Pager & Music Source",
For Use of Music Source 2 to "Hold" or "Hold &
BGM."
If you assign "BGM" to For Use, Music on Hold
is not provided to the party placed on Hold.
<Using the External Music Device>
1. Connect External Music Device (such as a
radio) to the system.
2. Set Music Selector Switch on the T-SW card to
"MUS 2."
3. Assign "System-Operation (1/2)" External
Music Source 1, 2 to "Yes, Yes."
4. Assign "Trunk Pager & Music Source",
For Use of Music Source 2 to "Hold" or "Hold &
BGM."
If you assign "BGM" to For Use, Music on Hold
is not provided to the party placed on Hold.
When Tenant Service is activated and two
External Music Devices are connected to the
system, the "Trunk-Pager & Music Source", Music
Source - Tenant setting determines which tenant
the external music device belongs to.
(for areas other than U.S.A. and Canada)
3-E-1-1 (X)
(60395)
Programming
System Programming
"System-Operation (1/3)",
External Music Source 1, 2
"Trunk-Pager & Music Source",
Music Source - For Use
Music Source - Tenant
Conditions
Even if tenant service is activated, the built-in
Music Source cannot be divided between two
tenants.
In this case, both built-in and external music
source can be used at a time by the following
setting.
1. Connect External Music Device such as a
radio to EXT MUSIC Jack 2 on the T-SW
Card.
2. Assign "System-Operation (1/2)", External
Music Source 1 to "Yes."
When both external music devices are accommo-
dated in the same tenant and the applications of
both devices are set identically, the device
connected to port 1 is used as the Music on
Hold.
An example of this setting is given below.
<Example>
Trunk-Pager & Music Source
Port
number
Tenant
1 1
2 1
Reference
VT Dumb
9-D-1.01 10-C-4.00
10-C-20.00
9-F-2.00
For Use
HOLD
HOLD