Panasonic KX-T336 System Reference Manual page 371

Note:
( * 1) Assign "CO Access Instantly (CAI)" feature to "Yes" on a trunk group by
entering the CAI command.
This feature is programmable on a trunk group basis.
In case of Local Trunk Dial Access, the system decides the mode by the
top trunk group of Local Trunk Hunt Sequence.
Refer to Section 10-C-58.00 "CO Access Instantly (CAI)" for further
information.
* Set the WSD (Waiting Second Dial tone) mode to "Yes" by entering the
( 2)
WS3 command.
Refer to Section 10-C-53.00 "World Select 3 (WS3)" for further
information.
( * 3) Assign "External First Digit Time-out" timer longer than a delayed timing
of the second dial tone from Central Office.
( * 4) Register the required area code and pause time by entering the WSD
command.
Refer to Section 10-C-61.00 "Waiting for Second Dial tone (WSD)" for
further information
Programming
System Programming
"System—System Timer",
External First Digit Time-Out
"World Select 3 (WS3)"
"CO Access Instantly (CAI)"
"Waiting Second Dial Tone (WSD)"
Conditions
External First Digit Time-Out
This timer is usually used to set the waiting time allowed between CO dial
tone or pseudo dial tone and the Time-out first digit dialed.
However, if the WSD feature is utilized by system programming, this timer
works to set the waiting time allowed between area code dialed and the
remaining number dialed.
Reference
VT Dumb
9-D-3.00 10-C-6.00
—
10-C-53.00
—
10-C-58.00
—
10-C-61.00
3-F-63
(30393)