Panasonic KX-T336 System Reference Manual page 294

3.00 Flexible Ringing Assignment
3.01 Flexible Ringing Assignment-
No Ringing
Description
Each line access button on the PITS telephone
can be programmed to ring or not to ring when
incoming calls arrive during the day or at night.
When incoming calls are placed to PITS from
extensions, CO lines or doorphones, the
indicators of the PDN, SDN, SCO, GCO and PCO
buttons corresponding to the respective incoming
calls start 240 winking. At the same time, ringing
is sent to the phone.
It is possible to disable the ringing and have
different settings in the day and night mode.
"Extension-Station", Day Ring and Night Ring are
set to No Ring.
Programming
System Programming
"Extension-Station (2/3)",
Day Ring
Night Ring
Conditions
When incoming calls are placed to a PDN, SDN,
SCO, GCO or PCO button for which no ringing
has been set, it is still possible to answer the call
flashing in 240 wink. In other words, responding
to incoming calls is not affected by no ringing
assignment in any way.
Reference
VT Dumb
9-G-1.02 10-C-24.00
3-D-18
3.02 Flexible Ringing Assignment -
Delayed Ringing
Description
When incoming calls are placed to PITS from
extensions, CO lines or doorphones, the
indicators of the PDN, SDN, SCO and GCO
buttons corresponding to the respective incoming
calls start 240 winking. At the same time, ringing
is sent to the phone.
It is possible to delay the ringing and have
different settings in the day and night mode.
"Extension-Station", Day Ring and Night Ring are
set to delayed ringing.
The delay time can be set to any one of three
values.
Delayed 1: 5 seconds after placement of
the incoming call
Delayed 3: 15 seconds after placement of
the incoming call
Delayed 6: 30 seconds after placement of
the incoming call
Programming
System Programming
"Extension-Station (2/3)",
Day Ring
Night Ring
Conditions
When incoming calls are placed to a PDN, SDN,
SCO or GCO button for which delayed ringing
has been set, it is still possible to answer the call
flashing in 240 wink before ringing begins. In
other words, responding to incoming calls is not
affected by delayed ringing assignment in any
way.
Reference
VT Dumb
9-G-1.02 10-C-24.00