Panasonic KX-T336 System Reference Manual page 116

3) Connection to the OPX Power Unit (KX-T96186/KX-T96186B)
(for areas other than U.S.A. and Canada)
Power Switch
Power 1
Off Premise Extension
(OPX) Power Unit
(KX-T96186/KX-T96186B)
To earth
ground
NOTE:
Model No. of available OPX Power Unit
depends on the electrical requirement in your
area.
9-pin Connector
(plug)
screw
9-pin Connector
screw
↓
1. Insert the 9-pin connector (plug) of the OPX
To AC Outlet
2. Connect the frame of the OPX Power Unit to
3. Check the Voltage Selector if it is set to your
4. Plug in the AC Power cord from the OPX
5. Turn on the Power Switch on the OPX Power
2-C-27-1 (X)
(60395)
(jack)
Voltage
Selector
Rear
Power Unit into the 9-pin connector (jack) on
the OPX card.
earth ground properly to protect the unit.
household AC voltage. If not, reset the
Voltage Selector to the correct position with a
screwdriver. There is no Voltage Selector for
some countries; The correct voltage is
already set.
Power Unit.
Unit.
• The Power indicator will be lit.
Primary Power Fuse
If the Power Indicator light goes out, replace
the Primary Power Fuse after removing the
cause.
OPX Card
(KX-T96185)