Panasonic KX-T336 System Reference Manual page 112

3.11 DID Card
4. MFC DID Card (KX-T96182CE) (for areas other than U.S.A. and Canada)
DID-MFC
"DID-MFC" is marked.
Connection of the Central Office Line
Insert the modular plug of the telephone line
cord (2-conductor wiring) into the modular jack
(DID ports 1 through 4) on the DID card.
To Terminal Board or
Modular Jacks from the
Central Office (CO).
(Note)
• Make sure to match the polarity of DID lines and DID port — Ring: "–" (negative)
• The DID ports 1 through 4 are equipped with "H (High)" and "L (Low)" leads in addition to "R" and "T.'
However, please be sure to use 2-conductor wiring cord when connecting.
• Connect the Main Unit frame to the earth ground properly to protect the unit.
KX-T96182CE
T R
T : Tip
R : Ring
View of TEL Jack (CO)
Use 2- conductor wiring cord (See "Note" below.)
2-C-25-3(X)
(70695)
• Insert this card into a free slot.
DID Card (KX-T96182CE)
Tip: "+" (positive).
DID Port No.1
DID Port No.2
DID Port No.3
DID Port No.4