Call Pickup Group - Panasonic KX-T336 System Reference Manual

7.02 Call Pickup Group

Description
Extensions belonging to a particular intercom
group can be divided into call pickup groups
which can execute the Dial Call Pickup feature.
The call pickup group belonging to an intercom
group is set by programming in the "Group-Call
Pickup Group", ICM.
Up to 32 call pickup groups can be assigned in
the system.
Extensions programmed into call pickup groups
are set in the "Extension-Station", Pickup Group.
It is not necessary for all extensions to be in a
pickup group.
See Section 4-D-3.01 "Dial Call Pickup" for
further information about the Dial Call Pickup
feature.
Programming
System Programming
"Group-Call Pickup Group",
ICM
"Extension-Station (1/3)",
Pickup Group
Conditions
Different call pickup groups can have the same
UCD and/or paging groups.
See Section 3-B-7.04 "Paging Group" for details
on Paging Groups.
See the following Section 3-B-7.03 "Uniform Call
Distribution (UCD) Group" for details on UCD
Groups.
Reference
VT Dumb
9-E-3.00 10-C-17.00
9-G-1.01 10-C-22.00
3-B-12
7.03 Uniform Call Distribution (UCD)
Group
Description
It is possible to execute UCD functions in a group
composed of one or more Call Pickup Groups.
Such a group is called a UCD group.
The "Group-Call Pickup Group" screen
determines which pickup group(s) will be in the
UCD group.
Up to 32 UCD groups can be assigned in the
system.
The UCD group and the call pickup group
configuring the UCD group must belong to the
same intercom group.
See Section 3-D-2.05 "Uniform Call Distribution
(UCD)-without OGM" and Section 3-D-2.06
"Uniform Call Distribution (UCD)-with OGM" for
further information about the UCD functions.
See the previous Section 3-B-7.02 "Call Pickup
Group" for details on Call Pickup Groups.
See Section 3-B-7.01 "Intercom Group" for
further information about ICM Groups.
Programming
System Programming
"Group-Call Pickup Group",
UCD
Conditions
None
Reference
VT Dumb
9-E-3.00 10-C-17.00