Starting The Configurator; Prp Device Identification; Prp Ip Address Configuration; Sntp Ip Address Configuration - GE MiCOM P747 Agile Technical Manual

MiCOM P747
7.3

STARTING THE CONFIGURATOR

If you install S1 Agile, the Configurator is launched from the S1 Agile menu. Otherwise:
1. Select the Configurator from the Windows Programs menu.
2. The Login screen appears. For user mode login, enter the Login name as User and click OK with no
password.
3. If the login screen does not appear, check all network connections.
4. The main window appears. In the bottom right-hand corner of the main window, click the Language
button to select the language.
5. The Network Board drop-down list shows the Network Board, IP Address and MAC Address of the
PC in which the Configurator is running.
7.4

PRP DEVICE IDENTIFICATION

To configure the redundant Ethernet board, go to the main window and click Identify Device.
The redundant Ethernet board connected to the PC is identified and its details are listed.
● Device address
● MAC address
● Version number of the firmware
● SNTP IP address
● Date & time of the real-time clock, from the board.
7.5

PRP IP ADDRESS CONFIGURATION

To change the network address component of the IP address,
1. From the main window click the IP Config button. The Device setup screen appears.
2. Enter the required board IP address and click OK. This is the redundancy network address, not the
IEC 61850 IP address.
3. The board network address is updated and displayed in the main window.
7.6

SNTP IP ADDRESS CONFIGURATION

To Configure the SNTP server IP address,
1. From the main window click the SNTP Config button. The Device setup screen appears.
2. Enter the required MAC SNTP address and server IP SNTP Address. Click OK.
3. The updated MAC and IP SNTP addresses appear in the main screen.
7.7

CHECK FOR CONNECTED EQUIPMENT

To check what devices are connected to the device being monitored:
1. From the main window, select the device.
2. Click the Equipment button.
3. At the bottom of the main window, a box shows the ports where devices are connected and their MAC
addresses.
P747-TM-EN-1
P747-TM-EN-1.1
Chapter 8 - Redundant Ethernet
263