Flow Connections To The Detector - Agilent Technologies 1100 Series Reference Manual

Flow Connections to the Detector

Preparations
Parts required Other modules
WARNING
When working with solvents please observe appropriate safety procedures (for
example, goggles, safety gloves and protective clothing) as described in the
material handling and safety data sheet supplied by the solvent vendor,
especially when using toxic or hazardous solvents.
NOTE
The flow cell is shipped with a filling of isopropanol (also recommended when the instrument and/or flow
cell is shipped to another location). This is to avoid breakage due to subambient conditions.
1100 Series Variable Wavelength Detector Reference Manual 21
Installing the Variable Wavelength Detector
Detector is installed in the LC system.
Parts from accessory kit, see
Two wrenches 1/4–5/16 inch for capillary connections
"Accessory Kit Contents"
1
on page 16