Flow Connections To The Micro Vacuum Degasser - Agilent Technologies 1260 Service Manual

Flow Connections to the Micro Vacuum Degasser

Parts required Description
Solvent cabinet including solvent bottles (filled with solvent) and bottle head assemblies
Solvent outlet tubes
Syringe with adapter
Hardware required Micro degasser
Preparations Install the micro vacuum degasser
When opening capillary or tube fittings, solvents may leak out.
WA R N I N G
The handling of toxic and hazardous solvents and reagents can carry health risks.
➔
1 Place solvent cabinet with the bottle(s) on top of the micro vacuum
2 Remove the front cover by pressing the snap fasteners on both sides.
1260 Infinity Micro Degasser Service Manual
Observe appropriate safety procedures (for example, wear goggles, safety gloves
and protective clothing) as described in the material handling and safety data sheet
supplied by the solvent vendor, especially when toxic or hazardous solvents are
used.
degasser.
Figure 6 Removing the Front Cover
Installing the Micro Vacuum Degasser

Flow Connections to the Micro Vacuum Degasser

3
21