7
Control Module Screens for the Agilent 1100 Variable Wavelength Detector
Use the m-key for the context sensitive menu. The Status command pulls up a monitor
screen displaying signals and spectra as programmed. Reset will load the VWD default
parameters. Balance brings the baseline back to set offset.
Use F1-key (More) . You can enter special VWD setpoints.
Settings - Timetable
With the F2 key (Timetable) you can list the timetable for the VWD. Press F7 key
(Insert) to add entries or F6 key (Delete) to remove entries.
210 1100 Series Variable Wavelength Detector Reference Manual