Detector - Agilent Technologies 1100 Series Reference Manual

4
Repairing the Variable Wavelength Detector
Using the ESD Strap
Electronic boards are sensitive to electronic discharge (ESD). In order to prevent
damage, always use an ESD strap supplied in the standard accessory kit (see
"Accessory Kit"
Figure 17
Overview of the Repairing of the Variable Wavelength Detector
84 1100 Series Variable Wavelength Detector Reference Manual
on page 159) when handling electronic boards and components.
1 Unwrap the first two folds of the band and wrap the exposed adhesive side firmly
around your wrist.
2 Unroll the rest of the band and peel the liner from the copper foil at the opposite
end.
3 Attach the copper foil to a convenient and exposed electrical ground.
Using the ESD Strap
Figure 18 below shows the main assemblies and their locations.