Stage 3: Flow Connections - Agilent Technologies 1200 Series User Manual

Stage 3: Flow Connections

When opening capillary or tube fittings solvents may leak out.
WA R N I N G
The handling of toxic and hazardous solvents and reagents can hold health risks.
➔
1 Connect the pump outlet capillary to port 1 of the injection valve.
2 Connect column-compartment inlet capillary to port 6 of the injection
3 Ensure that the waste tube is positioned inside the leak channel.
1200 Series AT User Manual
Please observe appropriate safety procedures (for example, goggles, safety gloves
and protective clothing) as described in the material handling and safety data sheet
supplied by the solvent vendor, especially when toxic or hazardous solvents are
used.
valve.
Figure 12 Hydraulic Connections
Installing the G1330B Thermostat
Installing the G1330B Thermostat
3
33