Sample, Blank and Holmium Spectrum
Use the F2 key (Spectrum) to take a spectrum (sample, blank or holmium). Use the
Left/Right arrow to move the curser within the spectrum to find the wavelength of
interest. To change the range refer to
Built-in Test Chromatogram (Simulation)
To start the built-in test chromatogram, use the F8 key (Execute) to enable the simulation.
Then press the m-key to open the pop-up menu. Select Start to start a run (all modules
in the Agilent 1100 system must be in ready state ).
1100 Series Variable Wavelength Detector Reference Manual 223
Control Module Screens for the Agilent 1100 Variable Wavelength Detector
"Settings - Spectrum Range"
7
on page 222.