Agilent Technologies 1100 Series Reference Manual page 125

Preparations
for this
procedure
are:
•
Remove the
front cover
and top
cover,
""Removing
the Top
Cover and
Top Foams"
on page
103.
Preparation for this procedure are:
•
The power supply, the fan and the processor board
are already installed.
2 Reconnect all cables to the main board and the
deuterium lamp connector.
1100 Series Variable Wavelength Detector Reference Manual 123
1 The status light pipe is clipped into the top cover
Repairing the Variable Wavelength Detector
1 Place the optical unit into the bottom foam.
3 Replace the lamp cover and the plate that secures the
optical unit.
4