Replacing Status Light Pipe; Installing The Optical Unit - Agilent Technologies 1100 Series Reference Manual

4
Repairing the Variable Wavelength Detector

Replacing Status Light Pipe

When required When part is broken
Tools required Screwdriver POZI 1 PT3
Parts required Status light pipe 5041-8384
2 Replace the foam section, the top cover and front cover, see
3 Replace the detector into the stack and reconnect the cables and capillaries.
4 Turn on the detector.

Installing the Optical Unit

When required
Tools required
Prerequisites
122 1100 Series Variable Wavelength Detector Reference Manual
"Installing the Foam and the Top Cover"
To continue the installation
Screwdriver POZI 1 PT3
Wrench 1/4 inch
The optical unit is already
removed
All other assemblies are already installed
on page 131.