Agilent Technologies 1100 Series Reference Manual page 216

7
Control Module Screens for the Agilent 1100 Variable Wavelength Detector
Selected Signals. Use the F8 key (Move) to enter available signals into the box for
selected signals or vice versa.
Method screens
On the Analysis screen use the F3 key (Method) to view the parameters in a method
and F8 key (Save As) to save the method in the module(s). The PC-Card key is only
active when a PCMCIA card is inserted in the control module.
Use F2 key (PC-Card) to save a method on a PCMCIA card. Use the Right/Left arrows
to switch between PC-Card and Instrument window. Use the UP/Down arrows to select
the method. Use the F7/F8 keys (Copy) to enter available signals into the box for
selected signals or vice versa.
214 1100 Series Variable Wavelength Detector Reference Manual