Agilent Technologies 1100 Series Reference Manual page 207

instrument fails). To reset the main power supply to normal operating conditions, turn
the instrument off, wait until it is approximately at ambient temperature and turn the
instrument on again.
The following table gives the specifications of the main power supply.
Table 60
1100 Series Variable Wavelength Detector Reference Manual 205
Main Power Supply Specifications
Maximum power 130 W
Line input 100–120 or 220–240 volts AC
10%, line frequency of 50/60 Hz
Output 1 + 24 V / 4.5 A (maximum)
Output 2 + 36 V / 2.5 A (maximum)
Output 3 + 5 V / 3 A
Output 4 + 15 V / 0.3 A
Output 5 - 15 V / 0.3 A
Introduction to the Variable Wavelength Dector
Continuous output
Wide ranging ±
Total power consumption of + 24 V
and + 36 V must not exceed 107 W.
6