Exchanging A Lamp - Agilent Technologies 1100 Series Reference Manual

4
Repairing the Variable Wavelength Detector
Leak sensor drying
Leak handling system
replacement

Exchanging a Lamp

When required
Tools required
Parts required
If you want to use the Agilent 1100 DAD lamp instead of the VWD lamp, you have to change
NOTE
the lamp settings in the VWD Configuration to lamp type 2140-0590. This ensures that
the DAD lamp's filament heating is operated like in the DAD. The instrument
specifications are based on the VWD lamp.
If the detector has been in use, the lamp may be hot. If so, wait five minutes for lamp
WARNING
to cool down.
Preparations for this procedure:
•
Turn the lamp off.
86 1100 Series Variable Wavelength Detector Reference Manual
If leak has occurred.
If broken or corroded.
If noise or drift exceeds application limits or lamp does not
ignite.
Screwdriver POZI 1 PT3
Deuterium lamp G1314-60100
Check for leaks.
Check for leaks.