Agilent Technologies 1100 Series Reference Manual page 235

unless another person, capable of rendering first aid and resuscitation, is present. Do not
replace components with power cable connected.
Do not operate the instrument in the presence of flammable gases or fumes. Operation
of any electrical instrument in such an environment constitutes a definite safety hazard.
Do not install substitute parts or make any unauthorized modification to the instrument.
Capacitors inside the instrument may still be charged, even though the instrument has
been disconnected from its source of supply. Dangerous voltages, capable of causing
serious personal injury, are present in this instrument. Use extreme caution when
handling, testing and adjusting.
Safety Symbols
Table 63
Table 63 Safety Symbols
Symbol Description
The apparatus is marked with this symbol when the user should refer to the instruction manual in order to
!
protect the apparatus against damage.
Indicates dangerous voltages.
Indicates a protected ground terminal.
Eye damage may result from directly viewing the light produced by the deuterium lamp used in this
product. Always turn off the deuterium lamp before opening the metal lamp door on the side of the
instrument.
A warning alerts you to situations that could cause physical injury or damage to
the equipment. Do not proceed beyond a warning until you have fully
understood and met the indicated conditions.
1100 Series Variable Wavelength Detector Reference Manual 233
shows safety symbols used on the instrument and in the manuals.
Safety Information
A