Generating A Client Details Report - 3Com WX1200 Reference Manual

Generating a Client
Details Report
5 Select the instance for which you want the report. For example, if the
scope is Building, select the building.
6 To select or change the output directory for the report, click Choose,
navigate to the new directory, and click Select.
7 To prevent 3WXM from replacing an existing report of the same type with
this new report, click next to Overwrite Existing Files to deselect this
option.
8 Click Generate.
9 When the report is generated, click the report link to view it.
The client summary report contains the following sections:
Session Summary
Total Num Sessions
Average SNR
Average RSSI
SSID Summary
Access Type Summary
Top Bandwidth Sessions
Low RSSI Sessions
Low SNR Sessions
(See "Using the Client Monitor View" on page 417 for information about
the data columns in each section of the report.)
The client details report lists details about current client sessions.
The data for this report comes from 3WXM Services. The Enable client
session collection option, located in the Client Monitor group box of
the Monitoring Settings tab, must be enabled. (See "Changing
Monitoring Settings" on page 503.)
1 Select the Reports tool bar option.
2 In the Report Category list, select Client Monitoring Reports.
3 In the Reports list, select Client Details.

Generating a Client Details Report

391