3Com WX1200 Reference Manual page 428

428 C 16: M
HAPTER ONITORING THE
N
ETWORK
Table 45 Activity Details for Disassociation (continued)
Column
Client IP Address
Auth Server IP
SSID
Table 46 Activity Details for Dot1x Failure
Column
User Name
Auth Protocol Type
Client Location
Failure Cause
MAC Address
SSID
Dot1x State
Failure Description
Description
IP address of the client.
System IP address of the WX switch that was attempting
to authenticate the client.
Note — The system IP address is listed even if the switch
was using a RADIUS server to authenticate the client.
SSID the client was associated with.
Description
Username of the client.
802.1X protocol used to authenticate the client:
EAP-TLS
MD5
NONE
PASS-THROUGH
PEAP
Mobility Domain, WX switch, MAP, and radio that were
dealing with the client.
Cause of the failure.
MAC address of the client.
SSID the client was requesting.
802.1X state of the client:
administrative-kill
bad-rsnie
bonded-auth-failure
fourway-hs-failure
max-sessions-exceeded
other
quiet-period
timeout
user-glob-mismatch
Description of the 802.1X failure.