3Com WX1200 Reference Manual page 425

Table 42 Activity Details for Authorization Failure (continued)
Column
Authorization Failure
Cause
Client Location
Session ID
Auth Server IP
SSID
User Parameters
Failure Cause
Description
Table 43 Activity Details for Authorization Successful
Column Description
User Name Username of the client.
MAC Address MAC address of the client.
Client VLAN Name VLAN to which the client was assigned.
Session Start Time System date and time on the WX switch when the client's
session began.
Using the Client Monitor View
Description
Reason the authorization failure trap was generated:
acl-mismatch
crypto-type-mismatch
end_date_mismatch
location-policy
mobility-profile-mismatch
other
ssid-mismatch
start_date_mismatch
timeofday-mismatch
user-param
vlan-tunnel-failure
Mobility Domain, WX switch, MAP, and radio that were
dealing with the client.
ID used by 3Com equipment to track the session within
the Mobility Domain.
System IP address of the WX switch that was attempting
to authenticate the client.
Note — The system IP address is listed even if the switch
was using a RADIUS server to authenticate the client.
SSID the client was requesting.
User attributes, if set to values other than null.
Cause of the failure.
425