3Com WX1200 Reference Manual page 402

402 C 15: G
HAPTER ENERATING
R
EPORTS
7 To change the output directory for the report, click on the button next to
output directory, navigate to the new directory, and click Select.
8 Click Generate.
9 When the report is generated, click View. A browser window containing
the report opens.
10 Optionally, select the floor.
11 Click View Work Order.
The origin reference point used in work orders to indicate MAP
placement is the upper left corner of the coverage area. (Typically, this
origin point will not match the origin point used on the floor plan itself.)