3Com WX1200 Reference Manual page 42

42 C 2: W
HAPTER ORKING WITH THE
3WXM U I
SER NTERFACE
Table 9 3WXM Tool Bar Options (continued)
Option
RF Planning
Configuration
Devices
Monitor
Rogue Detection
Description
Display the tree of configured sites in the Organizer
panel.
To display information about a site or an object in
that site, click on it. The information appears in the
Content panel.
To perform site-related tasks, click task links in the
Task List panel.
(See "Planning the 3Com Mobility System" on page 71.)
Display the tree of configured devices in the Organizer
panel.
To display information about a device or a
configuration area within that device, click on it. The
information appears in the Content panel.
To perform device-related tasks, click task links in the
Task List panel.
(See "Configuring WX System Parameters" on
page 159.)
Display a list of the WX switches in the network plan.
To upload, restart, or change the management
status of switches, view scheduled tasks, or distribute
certificates, use the Device tab.
To review and either allow or disallow local and
network changes, or to schedule configuration
deployment, use the Changes tab.
To manage and distribute MSS software images, use
the Image tab.
(See "Managing WX System Images and
Configurations" on page 347.)
Display status information and statistics for equipment
or site objects selected in the Organizer panel.
(See "Monitoring the Network" on page 403.)
Display information about rogue or interfering devices
detected by MAP radios. This option also provides tools
for tuning rogue detection settings and for issuing
countermeasures against rogues.
(See "Detecting and Combatting Rogue Devices" on
page 459.)