3Com WX1200 Reference Manual page 474

474 C 17: D
HAPTER ETECTING AND
C R
OMBATTING OGUE
3 Enter the information for the AP and place the icon for the AP in its floor
location, if applicable. (See "Placing Third-Party Access Points" on
page 132.) When you have finished, the AP appears under Objects to
Place in RF Planning.
To display the list
Select the Configuration option in the main 3WXM tool bar and click on
Third Party APs in the Organizer panel. The third-party APs are listed in
the Content panel.
To remove a third-party AP
1 Select the Configuration option in the main 3WXM tool bar and click on
Third Party APs in the Organizer panel. The third-party APs are listed in
the Content panel.
2 Select on the third-party AP you want to remove and click the Delete
button.
The address is removed from the third-party AP list. If the device is
detected by rogue detection, the device appears in the rogue list. Set the
display filter of the Rogue Detection screen to Current and click the
Refresh option on the toolbar.
D
EVICES