Viewing Wireless Services - 3Com WX1200 Reference Manual

Viewing Wireless
Services
1 Select the Configuration tool bar option.
2 In the Organizer panel, click the plus sign next to the WX switch.
3 Click the plus sign next to Wireless.
4 Select Wireless Services.
If you specify a RADIUS server group as the first method and a user is
denied access by the RADIUS server, no authentication and
authorization are attempted with the other methods specified in the
list.
If you specify LOCAL as the first method and a user is not in the local
user database on the WX, authentication and authorization are
attempted with a RADIUS server group if one is defined in the method
list.
The methods you select for authentication are also used for
authorization. You also can configure accounting for Start-Stop or
Stop-Only messages. The authentication method(s) for accounting can be
but are not required to be the same as the method(s) for authentication
and authorization.
If you plan to specify a RADIUS server group, configure the group first,
before using the wizard. To be available for selection in the wizard, the
RADIUS server group must already be configured before you open the
wizard. (See "Viewing and Configuring RADIUS Settings" on page 300.)
To view wireless services:
The service profiles appear in the Content panel. Each row in the table
shows settings for an individual service profile.
To display all settings for a service profile, select the service profile and
click Properties.
Viewing and Configuring Wireless Services 243