3Com WX1200 Reference Manual page 136

136 C 5: P
HAPTER LANNING THE
3C M S
OM OBILITY YSTEM
15 Verify the radio slot number and radio type.
For a dual-radio access point, 802.11b/g radios have a slot number of 1.
802.11a radios have a slot number of 2.
16 In the Channel Number list, select the channel number for the radio.
17 In the Transmit Power box, specify the transmit power for the radio.
18 To enable the radio, select Enabled.
The access point's radio must be enabled in order to be considered in
channel allocation.
19 In the SSID box, type the service set identifier (SSID) for the radio.
20 In the MAC Address box, type the MAC address of the radio.
21 In the Antenna Gain list, select the antenna gain for the radio.
22 If the access point has only one radio, click Finish. Otherwise, go to the
next step.
23 Click Next. The Radio A page appears.
24 Repeat step 15 through step 21 for the 802.11a radio.
25 Click Finish to save the changes.