3Com WX1200 Reference Manual page 319

Viewing and Configuring Last-Resort Network Access Rules
2 Specify whether the rule is for wireless access to an SSID or access
through a wired authentication port:
If the rule is for access to an SSID, do one of the following:
To match on any SSID name, leave the value any in the SSID box.
To match only on a specific SSID name, select or type the name in
the SSID box.
If the rule is for access through a wired authentication port, select
Wired.
CAUTION: The default SSID name any matches on all SSID names. If the
SSID box contains any and you do not change the SSID name, the
authentication rule allows clients who match the userglob to access any
SSID.
3 Click Next.
4 If the authentication rule is disabled, select Enabled.
When a rule is disabled, 3WXM does not add it to the switch's
configuration.
5 Select the authentication method(s) in the Available RADIUS Server
Groups list and click Add.
An authentication method specifies where the switch will look for user
information to authenticate users. You can select a RADIUS server group,
LOCAL (the switch's local user database), or both.
MSS tries the methods in the order they appear in the Current RADIUS
Server Groups list. To reorder the methods, select a method and click Up
or Down.
If you specify a RADIUS server group as the first method and a user is
denied access by the RADIUS server, no authentication and
authorization are attempted with the other methods specified in the
list.
If you specify LOCAL as the first method and a user is not in the local
user database on the WX, authentication and authorization are
attempted with a RADIUS server group if one is defined in the method
list.
The authentication methods you select are also used for authorization.
6 Click Next.
319