Displaying A Client's Geographical Location - 3Com WX1200 Reference Manual

value at end of polling interval - value at beginning of polling interval
Displaying a Client's
Geographical
Location
When looking at graphed data, you can see the data in absolute or delta
values.
Delta (rate of change) values are calculated with the following equation:
time difference (in seconds)
To change how you view data values, select Absolute to see absolute
values or Deltas to see rate-of-change values.
Removing a Client from the Watch List
To remove a client from the watch list, select the client, then click
the Client Monitor view's toolbar.
You can show the approximate location of a client within a site. The floor
the client is currently on is displayed, as well as the client's likely location
on the floor.
To display a client's session
1 Select the client.
2 Click on the Client Monitor view's toolbar.
3WXM checks whether three or more MAPs have detected the selected
client within 15 seconds of each other. If so, the Client Location screen is
displayed; go to step 5.
If three or more MAPs have not detected the client within 15 seconds of
each other, the Listeners Selection dialog box appears, displaying a list of
the MAPs that have detected the client.
3 If the Listeners Selection dialog box appears, select the MAPs for 3WXM
to use when calculating the client's location.
Using the Client Monitor View 441
on